Description
The M3062GF8N of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, low voltage (2.7V to 3.6V), they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications.
- Memory capacity:
- ROM 64K bytes
- RAM 8K bytes
- Shortest instruction execution time: 100ns (f(XIN)=10MHZ, VCC=2.7V to 3.6V)
- Supply voltage: 2.7V to 3.6V (f(XIN)=10MHZ, without software wait)
- Low power consumption: 30.0mW (VCC= 3V, f(XIN)=10MHZ, without software wait)
- Interrupts: 25 internal and 8 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt)
- Multifunction 16-bit timer: 5 output timers + 6 input timers
- Serial I/O: 5 channels (3 for UART or clock synchronous, 2 for clock synchronous)
- DMAC: 2 channels (trigger: 24 sources)
- A-D converter: 10 bits X 8 channels (Expandable up to 10 channels)
- D-A converter: 8 bits X 2 channels
- CRC calculation circuit: 1 circuit
- Watchdog timer: 1 line
- Programmable I/O: 87 lines
- Input port: 1 line (P85shared with NMI pin)
- Memory expansion: Available (to a maximum of 1M bytes)
- Chip select output: 4 lines
- Clock generating circuit: 2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator)
