MCU 8-bit ST62xx CISC 3884byte EPROM 5V 20-Pin SO Tube, ST62T60CM6, STMicroelectronics

The ST62T53C, ST62T60C, ST62T63C and ST62E60C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals. The ST62E60C is the erasable EPROM version of the ST62T60C device, which may be used to emulate the ST62T53C, ST62T60C and ST62T63C devices, as well as the respective ST6253C, ST6260B and ST6263B ROM devices. OTP and EPROM devices are functionally identical. The ROM based versions offer the same functionality selecting as ROM options the options defined in the programmable option byte of the OTP/EPROM versions. OTP devices offer all the advantages of user programmability at low cost, which make them the ideal choice in a wide range of applications where frequent code changes, multiple code versions or last minute programmability are required. These compact low-cost devices feature a Timer comprising an 8-bit counter and a 7-bit programmable prescaler, an 8-bit Auto-Reload Timer, EEPROM data capability (except ST62T53C), a serial port communication interface, an 8-bit A/D Converter with 7 analog inputs and a Digital Watchdog timer, making them well suited for a wide range of automotive, appliance and industrial applications.

  • 3.0 to 6.0V Supply Operating Range
  • 8 MHz Maximum Clock Frequency
  • -40 to +125°C Operating Temperature Range
  • Run, Wait and Stop Modes
  • 5 Interrupt Vectors
  • Look-up Table capability in Program Memory
  • Data Storage in Program Memory: User selectable size
  • Data RAM: 128 bytes
  • Data EEPROM: 64/128 bytes (none on ST62T53C)
  • User Programmable Options
  • 13 I/O pins, fully programmable as: Input with pull-up resistor Input without pull-up resistor Input with interrupt generation Open-drain or push-pull output Analog Input
  • 6 I/O lines can sink up to 30mA to drive LEDs or TRIACs directly
  • 8-bit Timer / Counter with 7-bit programmable prescaler
  • 8-bit Auto-reload Timer with 7-bit programmable prescaler (AR Timer)
  • Digital Watchdog
  • Oscillator Safe Guard
  • Low Voltage Detector for Safe Reset
  • 8-bit A/D Converter with 7 analog inputs
  • 8-bit Synchronous Peripheral Interface (SPI)
  • On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network
  • User configurable Power-on Reset
  • One external Non-Maskable Interrupt
  • ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port).
  • Характеристики

    Бренд

    On_chip_adc

    7-chx8-bit

    Max_operating_supply_voltage

    6 V

    Supplier_package

    SO

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS34613/SGSTS34611-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Schedule_b

    8542310000

    Ram_size

    128 byte

    Program_memory_type

    EPROM

    Program_memory_size

    3884 byte

    Product_dimensions

    13 x 7.6 x 2.35 mm

    Pin_count

    20

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    5 V

    Number_of_timers

    2

    Country_of_origin

    Malaysia

    Number_of_programmable_i_os

    13

    Msl_level

    3

    Mounting

    Surface Mount

    Maximum_speed

    8 MHz

    Max_processing_temp

    260

    Lead_finish

    Gold

    Тип интерфейса

    SPI

    Instruction_set_architecture

    CISC

    Htsn

    8542310001

    Eccn

    EAR99

    Data_bus_width

    8 Bit

    Min_operating_supply_voltage

    3.6 V

    Артикул: ST62T60CM6

    Описание

    The ST62T53C, ST62T60C, ST62T63C and ST62E60C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals. The ST62E60C is the erasable EPROM version of the ST62T60C device, which may be used to emulate the ST62T53C, ST62T60C and ST62T63C devices, as well as the respective ST6253C, ST6260B and ST6263B ROM devices. OTP and EPROM devices are functionally identical. The ROM based versions offer the same functionality selecting as ROM options the options defined in the programmable option byte of the OTP/EPROM versions. OTP devices offer all the advantages of user programmability at low cost, which make them the ideal choice in a wide range of applications where frequent code changes, multiple code versions or last minute programmability are required. These compact low-cost devices feature a Timer comprising an 8-bit counter and a 7-bit programmable prescaler, an 8-bit Auto-Reload Timer, EEPROM data capability (except ST62T53C), a serial port communication interface, an 8-bit A/D Converter with 7 analog inputs and a Digital Watchdog timer, making them well suited for a wide range of automotive, appliance and industrial applications.

  • 3.0 to 6.0V Supply Operating Range
  • 8 MHz Maximum Clock Frequency
  • -40 to +125°C Operating Temperature Range
  • Run, Wait and Stop Modes
  • 5 Interrupt Vectors
  • Look-up Table capability in Program Memory
  • Data Storage in Program Memory: User selectable size
  • Data RAM: 128 bytes
  • Data EEPROM: 64/128 bytes (none on ST62T53C)
  • User Programmable Options
  • 13 I/O pins, fully programmable as: Input with pull-up resistor Input without pull-up resistor Input with interrupt generation Open-drain or push-pull output Analog Input
  • 6 I/O lines can sink up to 30mA to drive LEDs or TRIACs directly
  • 8-bit Timer / Counter with 7-bit programmable prescaler
  • 8-bit Auto-reload Timer with 7-bit programmable prescaler (AR Timer)
  • Digital Watchdog
  • Oscillator Safe Guard
  • Low Voltage Detector for Safe Reset
  • 8-bit A/D Converter with 7 analog inputs
  • 8-bit Synchronous Peripheral Interface (SPI)
  • On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network
  • User configurable Power-on Reset
  • One external Non-Maskable Interrupt
  • ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port).
  • Детали

    Бренд

    On_chip_adc

    7-chx8-bit

    Max_operating_supply_voltage

    6 V

    Supplier_package

    SO

    Specifications

    https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS34613/SGSTS34611-1.pdf?hkey=52A5661711E402568146F3353EA87419

    Schedule_b

    8542310000

    Ram_size

    128 byte

    Program_memory_type

    EPROM

    Program_memory_size

    3884 byte

    Product_dimensions

    13 x 7.6 x 2.35 mm

    Pin_count

    20

    Operating_temperature

    -40 to 85 °C

    Operating_supply_voltage

    5 V

    Number_of_timers

    2

    Country_of_origin

    Malaysia

    Number_of_programmable_i_os

    13

    Msl_level

    3

    Mounting

    Surface Mount

    Maximum_speed

    8 MHz

    Max_processing_temp

    260

    Lead_finish

    Gold

    Тип интерфейса

    SPI

    Instruction_set_architecture

    CISC

    Htsn

    8542310001

    Eccn

    EAR99

    Data_bus_width

    8 Bit

    Min_operating_supply_voltage

    3.6 V