MCU 8-bit 89C 8051 CISC 64KB Flash 3V 80-Pin TQFP Tray, AT89C5132-ROTUL, Microchip

The AT89C5132 is a mass storage device controlling data exchange between various Flash modules, HDD and CD-ROM. The AT89C5132 includes 64K Bytes of Flash memory and allows In-System Programming through an embedded 4K Bytes of Boot Flash Memory The AT89C5132 include 2304 Bytes of RAM memory. The AT89C5132 provides all the necessary features for man-machine interface including, timers, keyboard port, serial or parallel interface (USB, SPI, IDE), ADC input, I2S output, and all external memory interface (NAND or NOR Flash, SmartMedia, MultiMedia, Data Flash cards).

  • Programmable Audio Output for Interfacing with Common Audio DAC
    • PCM Format Compatible
    • I2S Format Compatible
  • 8-bit MCU C51 Core-based (FMAX = 20 MHz)
  • 2304 Bytes of Internal RAM
  • 64K Bytes of Code Memory
    • AT89C5132: Flash (100K Write/Erase Cycles)
  • 4K Bytes of Boot Flash Memory (AT89C5132)
    • ISP: Download from USB (standard) or UART (option)
  • USB Rev 1.1 Device Controller
    • “Full Speed” Data Transmission
  • Built-in PLL
  • MultiMedia Card® Interface Compatibility
  • Data Flash® SPI Interface Compatibility
  • IDE/ATAPI Interface
  • 2 Channels 10-bit ADC, 8 kHz (8 True Bits)
    • Battery Voltage Monitoring
    • Voice Recording Controlled by Software
  • Up to 44 Bits of General-purpose I/Os
    • 4-bit Interrupt Keyboard Port for a 4 x n Matrix
    • SmartMedia® Software Interface
  • Hardware Watchdog Timer
  • Standard Full Duplex UART with Baud Rate Generator
  • Two Wire Master and Slave Modes Controller
  • SPI Master and Slave Modes Controller
  • Power Management
    • Power-on Reset
    • Software Programmable MCU Clock
    • Idle Mode, Power-down Mode
  • Operating Conditions
    • 3V, ±10%, 25 am Typical Operating at 25°C
    • Temperature Range: -40°C to +85°C

Характеристики

Бренд

Data_bus_width

8 Bit

Device_core

8051

Eccn

3A991.A.2

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

IDE/SPI/UART/USB

Lead_finish

Matte Tin

Max_processing_temp

260

Maximum_speed

40 MHz

Mounting

Surface Mount

Msl_level

3

Number_of_programmable_i_os

44

Number_of_timers

2

On_chip_adc

2-chx10-bit

Operating_supply_voltage

3 V

Operating_temperature

-40 to 85 °C

Pin_count

80

Product_dimensions

14.1 x 14.1 x 1.45 mm

Program_memory_size

64 KB

Program_memory_type

Flash

Ram_size

2.25 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/ATML/ATMLS04530/ATMLS04530-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFP

Max_operating_supply_voltage

3.3 V

Min_operating_supply_voltage

2.7 V

Max_power_dissipation

1000 mW

Артикул: AT89C5132-ROTUL

Описание

The AT89C5132 is a mass storage device controlling data exchange between various Flash modules, HDD and CD-ROM. The AT89C5132 includes 64K Bytes of Flash memory and allows In-System Programming through an embedded 4K Bytes of Boot Flash Memory The AT89C5132 include 2304 Bytes of RAM memory. The AT89C5132 provides all the necessary features for man-machine interface including, timers, keyboard port, serial or parallel interface (USB, SPI, IDE), ADC input, I2S output, and all external memory interface (NAND or NOR Flash, SmartMedia, MultiMedia, Data Flash cards).

  • Programmable Audio Output for Interfacing with Common Audio DAC
    • PCM Format Compatible
    • I2S Format Compatible
  • 8-bit MCU C51 Core-based (FMAX = 20 MHz)
  • 2304 Bytes of Internal RAM
  • 64K Bytes of Code Memory
    • AT89C5132: Flash (100K Write/Erase Cycles)
  • 4K Bytes of Boot Flash Memory (AT89C5132)
    • ISP: Download from USB (standard) or UART (option)
  • USB Rev 1.1 Device Controller
    • “Full Speed” Data Transmission
  • Built-in PLL
  • MultiMedia Card® Interface Compatibility
  • Data Flash® SPI Interface Compatibility
  • IDE/ATAPI Interface
  • 2 Channels 10-bit ADC, 8 kHz (8 True Bits)
    • Battery Voltage Monitoring
    • Voice Recording Controlled by Software
  • Up to 44 Bits of General-purpose I/Os
    • 4-bit Interrupt Keyboard Port for a 4 x n Matrix
    • SmartMedia® Software Interface
  • Hardware Watchdog Timer
  • Standard Full Duplex UART with Baud Rate Generator
  • Two Wire Master and Slave Modes Controller
  • SPI Master and Slave Modes Controller
  • Power Management
    • Power-on Reset
    • Software Programmable MCU Clock
    • Idle Mode, Power-down Mode
  • Operating Conditions
    • 3V, ±10%, 25 am Typical Operating at 25°C
    • Temperature Range: -40°C to +85°C

Детали

Бренд

Data_bus_width

8 Bit

Device_core

8051

Eccn

3A991.A.2

Htsn

8542310001

Instruction_set_architecture

CISC

Тип интерфейса

IDE/SPI/UART/USB

Lead_finish

Matte Tin

Max_processing_temp

260

Maximum_speed

40 MHz

Mounting

Surface Mount

Msl_level

3

Number_of_programmable_i_os

44

Number_of_timers

2

On_chip_adc

2-chx10-bit

Operating_supply_voltage

3 V

Operating_temperature

-40 to 85 °C

Pin_count

80

Product_dimensions

14.1 x 14.1 x 1.45 mm

Program_memory_size

64 KB

Program_memory_type

Flash

Ram_size

2.25 KB

Schedule_b

8542310000

Screening_level

Industrial

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/ATML/ATMLS04530/ATMLS04530-1.pdf?hkey=52A5661711E402568146F3353EA87419

Supplier_package

TQFP

Max_operating_supply_voltage

3.3 V

Min_operating_supply_voltage

2.7 V

Max_power_dissipation

1000 mW