MCU 8-bit C500 8051 CISC 32KB EPROM 5V 44-Pin MQFP Ammo, B505CA4EMCAXT, Infineon

The C505CA enhances the C500 family of 8-bit microcontrollers by a new member which provides full CAN version 2.0B integrated On-Chip. The C505CA meets the current requirements for increasingly small controllers with high performance, optimized EMC behavior and fast communication between decentralized sensors, actuators and the host.. The device provides 32 KByte of OTP or 16/32 KByte of ROM, 256 Byte of RAM, 1 KByte of XRAM, CAN Version 2.0B, an asynchronous/synchronous serial interface and highly accurate 10-bit ADC integrated on chip. With an external clock rate of 20 MHz, the C505CA has an instruction time of 300 ns. Typical applications for the C505CA are automotive body and industrial control.

  • Fully compatible to standard 8051 microcontroller
  • Superset of the 8051 architecture with 8 datapointers
  • Up to 20 MHz operating frequency
    • 375 ns instruction cycle time @16 MHz
    • 300 ns instruction cycle time @20 MHz (50 % duty cycle)
  • On-chip program memory (with optional memory protection)
    • C505(C)(A)-2R : 16K byte on-chip ROM
    • C505A-4R/C505CA-4R: 32K byte on-chip ROM
    • C505A-4E/C505CA-4E: 32K byte on-chip OTP
    • alternatively up to 64k byte external program memory
  • 256 byte on-chip RAM
  • On-chip XRAM
    • C505/C505C : 256 byte
    • C505A/C505CA : 1K byte
  • 32 + 2 digital I/O lines
    • Four 8-bit digital I/O ports
    • One 2-bit digital I/O port (port 4)
    • Port 1 with mixed analog/digital I/O capability
  • Three 16-bit timers/counters
    • Timer 0 / 1 (C501 compatible)
    • Timer 2 with 4 channels for 16-bit capture/compare operation
  • Full duplex serial interface with programmable baudrate generator (USART)
  • Full CAN Module, version 2.0 B compliant (C505C and C505CA only)
    • 256 register/data bytes located in external data memory area
    • 1 MBaud CAN baudrate when operating frequency is equal to or above 8 MHz
    • internal CAN clock prescaler when input frequency is over 10 MHz
  • On-chip A/D Converter
    • up to 8 analog inputs
    • C505/C505C : 8-bit resolution
    • C505A/C505CA: 10-bit resolution
  • Twelve interrupt sources with four priority levels
  • On-chip emulation support logic (Enhanced Hooks Technology TM)
  • Programmable 15-bit watchdog timer
  • Oscillator watchdog
  • Fast power on reset
  • Power Saving Modes
    • Slow-down mode
    • Idle mode (can be combined with slow-down mode)
    • Software power-down mode with wake up capability through P3.2/INT0 or P4.1/RXDC pin
  • P-MQFP-44 package
  • Pin configuration is compatible to C501, C504, C511/C513-family
  • Temperature ranges: SAB-C505 versions TA = 0 to 70 °C, SAF-C505 versions TA = -40 to 85°C, SAH-C505 versions TA = -40 to 110°C, SAK-C505 versions TA = -40 to 125°C

Характеристики

Бренд

Number_of_timers

3

Schedule_b

8542310000

Program_memory_type

EPROM

Product_dimensions

10 x 10 x 2 mm

Pin_count

44

Operating_temperature

0 to 70 °C

Operating_supply_voltage

5 V

On_chip_adc

8-chx10-bit

Number_of_programmable_i_os

34

Data_bus_width

8 Bit

Mounting

Surface Mount

Maximum_speed

20 MHz

Тип интерфейса

USART

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

8051

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS03052/INFNS03052-1.pdf?hkey=52A5661711E402568146F3353EA87419

Артикул: B505CA4EMCAXT

Описание

The C505CA enhances the C500 family of 8-bit microcontrollers by a new member which provides full CAN version 2.0B integrated On-Chip. The C505CA meets the current requirements for increasingly small controllers with high performance, optimized EMC behavior and fast communication between decentralized sensors, actuators and the host.. The device provides 32 KByte of OTP or 16/32 KByte of ROM, 256 Byte of RAM, 1 KByte of XRAM, CAN Version 2.0B, an asynchronous/synchronous serial interface and highly accurate 10-bit ADC integrated on chip. With an external clock rate of 20 MHz, the C505CA has an instruction time of 300 ns. Typical applications for the C505CA are automotive body and industrial control.

  • Fully compatible to standard 8051 microcontroller
  • Superset of the 8051 architecture with 8 datapointers
  • Up to 20 MHz operating frequency
    • 375 ns instruction cycle time @16 MHz
    • 300 ns instruction cycle time @20 MHz (50 % duty cycle)
  • On-chip program memory (with optional memory protection)
    • C505(C)(A)-2R : 16K byte on-chip ROM
    • C505A-4R/C505CA-4R: 32K byte on-chip ROM
    • C505A-4E/C505CA-4E: 32K byte on-chip OTP
    • alternatively up to 64k byte external program memory
  • 256 byte on-chip RAM
  • On-chip XRAM
    • C505/C505C : 256 byte
    • C505A/C505CA : 1K byte
  • 32 + 2 digital I/O lines
    • Four 8-bit digital I/O ports
    • One 2-bit digital I/O port (port 4)
    • Port 1 with mixed analog/digital I/O capability
  • Three 16-bit timers/counters
    • Timer 0 / 1 (C501 compatible)
    • Timer 2 with 4 channels for 16-bit capture/compare operation
  • Full duplex serial interface with programmable baudrate generator (USART)
  • Full CAN Module, version 2.0 B compliant (C505C and C505CA only)
    • 256 register/data bytes located in external data memory area
    • 1 MBaud CAN baudrate when operating frequency is equal to or above 8 MHz
    • internal CAN clock prescaler when input frequency is over 10 MHz
  • On-chip A/D Converter
    • up to 8 analog inputs
    • C505/C505C : 8-bit resolution
    • C505A/C505CA: 10-bit resolution
  • Twelve interrupt sources with four priority levels
  • On-chip emulation support logic (Enhanced Hooks Technology TM)
  • Programmable 15-bit watchdog timer
  • Oscillator watchdog
  • Fast power on reset
  • Power Saving Modes
    • Slow-down mode
    • Idle mode (can be combined with slow-down mode)
    • Software power-down mode with wake up capability through P3.2/INT0 or P4.1/RXDC pin
  • P-MQFP-44 package
  • Pin configuration is compatible to C501, C504, C511/C513-family
  • Temperature ranges: SAB-C505 versions TA = 0 to 70 °C, SAF-C505 versions TA = -40 to 85°C, SAH-C505 versions TA = -40 to 110°C, SAK-C505 versions TA = -40 to 125°C

Детали

Бренд

Number_of_timers

3

Schedule_b

8542310000

Program_memory_type

EPROM

Product_dimensions

10 x 10 x 2 mm

Pin_count

44

Operating_temperature

0 to 70 °C

Operating_supply_voltage

5 V

On_chip_adc

8-chx10-bit

Number_of_programmable_i_os

34

Data_bus_width

8 Bit

Mounting

Surface Mount

Maximum_speed

20 MHz

Тип интерфейса

USART

Instruction_set_architecture

CISC

Htsn

8542310001

Eccn

EAR99

Device_core

8051

Specifications

https://4donline.ihs.com/images/VipMasterIC/IC/INFN/INFNS03052/INFNS03052-1.pdf?hkey=52A5661711E402568146F3353EA87419